Troubleshooting guide

4 — TCP enhanced authentication
Alcatel-Lucent 5620 Service Aware Manager 4-7
5620 SAM
System Administrator Guide
3 Click on the Local Definitions tab. The NEs that have a local instance of the key
chain are displayed in a list.
4 View the list of NEs to confirm that the key chain is distributed to the required
NEs.
5 Close the forms.
Procedure 4-4 To identify differences between a global and local key
chain policy or two local key chains
1 Choose Administration→Security→TCP KeyChains from the 5620 SAM main menu.
The TCP KeyChains form opens.
2 Choose Local from the Policy scope menu to select a local NE. The Select a
Network Element form opens.
3 Select an NE and click OK. The NE IP address is displayed in the Local Node IP
Address field.
4 Choose the local key chain that you need to compare with another key chain and
click Properties. The KeyChain (Edit) form opens.
5 Click Local Audit On. The Local Audit form opens.
6 Perform one of the following from the Policy scope menu:
a Choose Global and go to step 7.
b Choose Local to choose an NE. The Select a Network Element form opens.
i Select an NE and click OK. The NE IP address is displayed in the Local
Node IP Address field.
ii Go to step 7.
7 Click OK. The Local Audit form closes and the appropriate global|local policy
opens for comparison.
8 View the differences between the key chains by clicking on the tabs that are
highlighted with an arrow icon to indicate that differences exist on the forms. An
arrow icon beside a property indicates that the property is modified. In lists, new
entries are highlighted in pink and modified entries are highlighted in purple.
9 Close the forms.
Note 1 — You can cancel the local audit at any time by clicking Local
Audit Off on the KeyChain (Edit) form.
Note 2 — The 5620 SAM does not identify differences between the
Begin Time and End Time properties of key chains.
Release 12.0 R6 | November 2014 | 3HE 08861 AAAF TQZZA Edition 01