Troubleshooting guide

4 — TCP enhanced authentication
4-4 Alcatel-Lucent 5620 Service Aware Manager
5620 SAM
System Administrator Guide
Procedure 4-1 To configure a global TCP key chain
1 Choose Administration→Security→TCP KeyChains from the 5620 SAM main menu.
The TCP KeyChains form opens.
2 Click Create or choose a key chain and click Properties. The KeyChain Create|Edit
form opens.
3 Configure the required parameters.
4 Click on the KeyChain Key tab.
5 Click Create or choose a key chain key and click Properties. The KeyChain Key
Create|Edit form opens.
6 Configure the required parameters.
The End Time parameter is only configurable if the Key Direction parameter is set
to Receive.
7 Save and close the forms.
Note — Do not use a colon in the policy name. The 5620 SAM uses
colons as separators for the object full name.
Caution — Alcatel recommends that you choose the Send-receive
option for the Key Direction parameter to ensure bidirectional
communication between NEs.
Note 1 — The 5620 SAM generates a random default value for the Key
parameter. For greater security, Alcatel-Lucent recommends that you
accept this value rather than manually enter a value.
Note 2 — You cannot subsequently delete a TCP key chain or TCP key
when the Admin State parameter for the key chain or key is set to In
Service.
Release 12.0 R6 | November 2014 | 3HE 08861 AAAF TQZZA Edition 01