Contents 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. Your mobile.................................................................................................................................. 1 Getting started............................................................................................................................. 5 Basic functions ............................................................................................................................ 6 Display ..............
Explanation: Standby time refers to the time when the phone although in operating mode is not used for making calls or remains idle. Standby time and call time are both related to the conditions of use, the network situation and the environment. The SAR standard is 2.0W/Kg. This phone’s highest actual value: 1.49W/kg Please make appropriate use of the product to reduce the effects of EMF.1.2 Key pad indications 1.
1.3 Main Menu From the main menu, use the navigation key to select the item you want. After selection, press the left soft key to confirm.
Tools: Set or use the stop-watch, the calendar and the world clock 1.
2. Getting started 2.1 Removing the back cover 2.2Inserting the UIM card (Operator dependent) The mobile phone can only be used with the UIM card inserted. Press and hold the key. Insert the UIM card with the metallic contact downwards, sliding it into the slot as shown by the arrow, paying attention to the position of the slanted angle. To remove the UIM card, slide the card out in the direction shown.
2.3 Installing / Removing the battery Remove the back cover and remove the battery as shown (direction of the arrow). 2.3 Charging your phone Attention: the phone will emit a low warning tone 20 minutes before the power runs out completely. 3. Basic functions 3.1 Switch-on/off When power is sufficient, press and hold the key to switch on. If you have activated a password or a PIN code, you will be prompted to enter it.
3.2.2 Dialling a number in the Call Memory In the standby mode, press the key to access the Call Memory, and press this key again to dial the selected number. 3.2.3 Speed dialling In the standby mode, make a long key press on keys 2 to 9 to speed-dial a number. If you have not set the number for speed dialling, the phone will display “Speed dial is empty”. Press the left soft key to access the “Contact” and select speed dial.
3.4.4 Introduction to the input method Inserting punctuations and special symbols When you are editing a text using the Es and English input mode, press key “1” to select the punctuation mark or a special symbol or press and hold “*” to access the symbol table. In the number input mode, press “*” to insert a “*”, and press and hold the “*” key to access the table of symbols.
7 p，q，r，s，P，Q，R，S，7 8 t，u，v，T，U，V，8 9 w，x，y，z，W，X，Y，Z，9 Number input method (123) Press the number key to enter the corresponding number, press “*” to enter “*”. 4. Display Wallpaper: Choose the wallpaper and set it as main screen. Style: Choose a scheme of display. There are 6 available styles for you to choose Backlight time: Set the backlight time - 10 sec.30 sec.50 sec. always switch on LED control: Set the LED light on or off for SMS, Incoming call and alarm clock.
Detail: Check the data on the selected number. Save: Save the selected number in Contacts. Call: Call the selected number. IP call: Call the selected number with IP prefix. Send message: Send a message to the selected number. Send contact: Send the selected number to another party. Delete: Delete the selected number. 5.2 Call time Select Menu/Recent calls/Call time to display the time record of all received calls, outgoing calls and all calls.
8. Contact The phone can store up to 500 contacts. From the standby mode press the right soft key to display the list of contacts. The contact list can also be accessed through Menu/Contact. 8.1 Contact list Select Menu/Contact/Contact list to access the contact records. Select the left soft key for the following options: View, Edit, Call, IP Call, Send message, Send contact, Delete, and Search View: Check the contact’s personal information.
ring tone. 8.5 Speed dial Select Menu/Contact/Speed dial to set keys 2 to 9 for speed dialling. If the number key has not been set, press the left soft key and select a phone number from Contacts. If the number key has been set, press the left soft key and the following options will be available: Set number, clear. Set number: Re-set the speed dialling for a key clear: cancel the speed dial number 8.
9.2 Inbox Select Menu/Messages/Inbox to access the list of messages in this box. Press the left soft key for the following options: View, Reply, Delete, Forward, Call, and IP Call. View: Review the contents of the current messages. From the contents, press the left soft key for the following options: Reply, Delete, Forward, Extract details, Call, IP call. Reply: Send a message to the sender of the current message. Delete: Delete a message. Forward: Modify the contents of a message and send it.
Press the left soft key for the following options: View, Send, Edit and Add. It has 10 message templates in factory reset mode, and you may edit it optionally or add more templates accordingly. 9.6 Delete message Select Menu/SMS/Delete message to access delete function. You may delete the messages in Inbox, Outbox, and Draft box and also clear all the messages. 9.
number, press the left soft key to choose the number that you want to send and then press ok key to send out. If the contact person has many numbers, you may switch between the numbers by pressing the left key or the right key, and then choose the numbers you want to send by pressing the left soft key and press OK key to send out. 10. Settings Select Menu/Settings to access to set the parameter of mobile. 10.
You can activate or inactivate Auto power on function, and set the time when you want the phone power on automatically. 10.4 Auto power off he phone power off automatically. 10.5 Security Select menu/settings/security, then enter the security submenu by inputting the phone code (default code is 1234). You can set entry code for your SMS, phone book, call memory there.
on/off, and the alert mode of incoming call, SMS, and the unanswered call. Load default: resumed the mode you choose to the factory settings. 12. Tools 12.1 Stop watch Press the key to start counting and the key to stop it. While counting, press the key to record the previous count. Up to ten recordings can be stored. When the counting is stopped, press the key to reset and to exit the stop watch function. 12.2 Calculator Your phone has a timer function and can carry out simple operations, i.e.
FAQ Item to be checked The telephone does not Make sure that the charger is correctly connected to the charge properly phone and the power socket. Make sure you are using a charger specifically designed for this phone. The phone does not Check the battery charge level. switch on Make sure the battery is properly installed. Press and hold the ON key until the screen comes on. The phone card has Make sure the UIM card is properly inserted.
FAQ Item to be checked When you cannot (1) The network provider does not provide this service or you connect to the network have not subscribed to this service. Please contact your normally provider for details on the subscription and use of these services. (2) Incorrect setting. Please set the correct parameters 14. Safety and use Please read carefully and observe the following regulations to avoid damaging your telephone or using it against the law. Electronic devices/Health care facilities.
car engines. Safety of use in a vehicle Please observe the relevant local or national regulations related to the use of mobile phones in a vehicle. Please refrain from using the phone while driving. If you are driving and need to use the phone in an emergency, use a hands-free device (optional purchase) to be safe. Otherwise, park the car before using the phone.
Operating environment This phone is equipped with a built-in antenna. When the phone is on, unless necessary, do not touch the antenna area (top of the phone) for optimal communication quality. Do not use your phone while it is being charged during thunderstorms, or use it outdoors to avoid being struck by lightning or other injury. Do not use your mobile phone in dusty, wet, dirty places or places near magnetic fields to prevent malfunction of its internal circuits. Keep the phone as dry as possible.
Please take your used, unwanted lithium batteries to a designated place. Do not dispose of them in a rubbish bin. Emergency call In an emergency situation, if the phone is on and you are within the network range, it can be used to make an emergency call. However, emergency call numbers may not be reachable on all networks; you should never rely on your mobile phone for emergency calls. Using the battery/charger Only use batteries and chargers approved by the manufacturer.
prevent it from leaking or exploding. Do not remove the battery when the phone is on. If the battery is distorted, has changed colour or is unusually hot when charging or when it is stored, remove immediately the battery and stop using it or it may leak, become overheated, explode or catch fire. If a battery is not used for a long period of time after charging, store it at room temperature Do not touch the power socket, power cable or charger with wet hands to avoid electric shock.
