User guide

September 2009
OmniSwitch 6400/6850/6855/9000/9000E------ Release 6.4.2.R01 Page 7 of 79
New Hardware Supported
OmniSwitch 6855-U24X
OS6855-24-U24X Stackable Hardened Gigabit Ethernet L3 fixed configuration chassis in a 1U form factor
designed to operate in harsh environments. This chassis contains 22 SFP connectors, two RJ-45/SFP combo
ports and two SFP+ 10-Gigabit ports that can be used as either uplink or stacking ports.
OmniSwitch 9702 Chassis
Ten slot chassis for OS9/OS9E modules - 8 dedicated slots for network interfaces, 2 dedicated slots for
CMMs (management & switching fabric) and 3 power supply bays.
• Provides enhanced backplane throughput when combined with the OS9702E-CMM and E-Series
network interfaces.
OS9702E-CMM
The OS9702E-CMM Chassis Management Module used in the OmniSwitch 9700/9702 chassis. Includes
processor module and an enhanced fabric module.
• Requires E-series network interfaces
• Provides enhanced backplane throughput when combined with the OS9702 chassis.
iSFP-GIG-T
Industrial 10/100/1000Base-T Gigabit Ethernet transceiver (SFP MSA). Supports category 5, 5E, and
6 copper cabling up to 100m.
iSFP-10GIG-SR
10-Gigabit industrial optical transceiver (SFP+). Supports multimode fiber over 850nm wavelength
with an LC connector. Typical reach of 300 m. Can be used as an uplink or for stacking OS6855-
U24X switches.
iSFP-10GIG-LR
10-Gigabit industrial optical transceiver (SFP+). Supports single mode fiber over 1310nm wavelength
with an LC connector. Typical reach of 10 km. Can be used as an uplink or for stacking OS6855-
U24X switches.
iSFP-10G-C10M / iSFP-10G-C30CM / iSFP-10G-C3M
10-Gigabit industrial copper cable (SFP+) available in 10 meter, 3 meter or 30 centimeter lengths.
Used for stacking OS6855-U24X switches.
OS9-PS-0725A
725W AC power supply for OS9000 / OS9000E systems.
OS9-PS-0725D
725W DC power supply for OS9000 / OS9000E systems.