User guide

September 2009
Page 64 of 79 OmniSwitch 6400/6850/6855/9000/9000E—Release 6.4.2.R01
Unsupported CLI Commands
The following CLI commands are not supported in this release of the software:
Software Feature Unsupported CLI Commands
BGP ip bgp redist-filter status
ip bgp redist-filter
ip bgp redist-filter community
ip bgp redist-filter local-preference
ip bgp redist-filter metric
ip bgp redist-filter effect
ip bgp redist-filter subnets
BFD
ip bfd-std mode demand
Chassis Mac Server mac-range local
mac-range duplicate-eeprom
mac-range allocate-local-only
show mac-range status
Chassis Supervision show fabric
Command Line Interface (CLI) 10 gig slot [slot] phy-a|phy-b
DHCP Relay ip helper traffic-suppression
ip helper dhcp-snooping port traffic-suppression
Ethernet Interfaces interfaces long
interfaces runt
interfaces runtsize
Flow Control flow
flow wait time
interfaces flow
Hot Swap reload ni [slot] #
[no] power ni all
NTP no ntp server all
OSPF ip ospf redist status
ip ospf redist
ip ospf redist metric
ip ospf redist metric-type
ip ospf redist-filter
ip ospf redist-filter effect
ip ospf redist-filter metric
ip ospf redist-filter route-tag
ip ospf redist-filter redist-control
PIM ip pim cbsr-masklength
ip pim static-rp status
ip pim rp-candidate
ip pim crp-address
ip pim crp-expirytime
ip pim crp-holdtime
ip pim crp-interval
ip pim crp-priority
ip pim data-timeout
ip pim joinprune-interval
ip pim source-lifetime
ip pim interface mode