User guide

September 2009
Page 54 of 79 OmniSwitch 6400/6850/6855/9000/9000E—Release 6.4.2.R01
SNMP Traps
The following table provides a list of SNMP traps managed by the switch.
No. Trap Name Platforms Description
0 coldStart all The SNMP agent in the switch is reinitiating
and itsk configuration may have been altered.
1 warmStart all The SNMP agent in the switch is reinitiating
itself and its configuration is unaltered.
2 linkDown all The SNMP agent in the switch recognizes a
failure in one of the communications links
configured for the switch.
3 linkUp all The SNMP agent in the switch recognizes that
one of the communications links configured for
the switch has come up.
4 authenticationFailure all The SNMP agent in the switch has received a
protocol message that is not properly
authenticated.
5 entConfigChange all An entConfigChange notification is generated
when a conceptual row is created, modified, or
deleted in one of the entity tables.
6 aipAMAPStatusTrap all The status of the Alcatel-Lucent Mapping
Adjacency Protocol (AMAP) port changed.
7 aipGMAPConflictTrap — This trap is not supported.
8 policyEventNotification all The switch notifies the NMS when a significant
event happens that involves the policy manager.
9 chassisTrapsStr all A software trouble report (STR) was sent by an
application encountering a problem during its
execution.
10 chassisTrapsAlert all A notification that some change has occurred in
the chassis.
11 chassisTrapsStateChange all An NI status change was detected.
12 chassisTrapsMacOverlap all A MAC range overlap was found in the
backplane eeprom.
13 vrrpTrapNewMaster all The SNMP agent has transferred from the
backup state to the master state.
14 vrrpTrapAuthFailure — This trap is not supported.
15 healthMonDeviceTrap all Indicates a device-level threshold was crossed.
16 healthMonModuleTrap all Indicates a module-level threshold was crossed.
17 healthMonPortTrap all Indicates a port-level threshold was crossed.
18 bgpEstablished all The BGP routing protocol has entered the
established state.
19 bgpBackwardTransition all This trap is generated when the BGP router port
has moved from a more active to a less active
state.
20 esmDrvTrapDropsLink all This trap is sent when the Ethernet code drops
the link because of excessive errors.
21 pimNeighborLoss all Signifies the loss of adjacency with a neighbor
device. This trap is generated when the neighbor
time expires and the switch has no other
neighbors on the same interface with a lower IP