User guide

Index
OmniSwitch 6600 Family Network Configuration Guide April 2005 Index-3
RIP 15-2
RMON 26-9
source learning 2-2, 3-2
static link aggregation 11-2
switch health 26-11
switch logging 27-3
VLAN rules 8-2
VLANs 4-2
VRRP 18-2
Denial of Service
see DoS
DHCP 17-4, 17-5
used with 802.1X 21-5
DHCP Relay 17-1, 17-9
application examples 17-3, 17-6, 17-7
authenticated VLANs 17-5
AVLAN forwarding option 17-10
defaults 17-2
DHCP server IP address 17-8
forward delay time 17-10
maximum number of hops 17-10
standard forwarding option 17-10
DHCP servers
AV-Client 20-23
for authentication clients 20-29
Telnet authentication clients 20-7
Web browser authentication clients 20-8
DHCP VLAN rules 8-5
directed broadcast 13-13
disposition
ACLs 24-4, 24-8
global defaults for QoS rules 23-13
DNS
URL for Web browser authentication clients 20-8
DoS 13-13
enabling traps 13-16
setting decay value 13-16
setting penalty values 13-15
Setting Port Scan Penalty Value 13-16
DSCP
trusted ports 23-20
dynamic link aggregation 12-1
application examples 12-4, 12-34
assigning ports 12-12
creating groups 12-11
defaults 12-3
deleting groups 12-11
displaying 12-38
group actor administrative key 12-20
group actor system ID 12-21
group actor system priority 12-21
group administrative state 12-20
group names 12-19
group partner administrative key 12-22
group partner system ID 12-23
group partner system priority 12-22
groups 12-11
LACPDU bit settings 12-24, 12-28
LACPDU frames 12-24, 12-28
Link Aggregation Control Protocol (LACP) 12-7
MAC address 12-21, 12-23, 12-25, 12-30
overview 12-7
port actor administrative priority 12-26
port actor port priority 12-27
port actor system administrative states 12-24
port actor system ID 12-25
port partner administrative key 12-30
port partner administrative priority 12-32
port partner administrative state 12-28
port partner administrative system ID 12-30
port partner administrative system priority 12-31
port partner port administrative status 12-32
ports 12-12
removing ports 12-18
specifications 12-2
dynamic log
LDAP accounting servers 19-24
dynamic VLAN port assignment
mobile ports 7-4
secondary VLANs 7-13
VLAN rules 8-1
E
errors 27-8
Ethernet
application examples 1-4
defaults 1-3
flood rate 1-20
full duplex 1-17
half duplex 1-17
multicast traffic 1-20
F
Fast Spanning Tree 5-4
filtering lists
see ACLs
flow command 1-14
flow control 1-14, 1-23
flow control wait time 1-15
flow wait time command 1-15
fragments
built-in policies 23-11
classifying 23-17
frame type 10-7
G
GMAP
see Group Mobility Advertisement Protocol
gmap disable command 9-9
gmap enable command 9-9
gmap gap time command 9-10
gmap hold time command 9-11
gmap update time command 9-10
Group Mobility Advertisement Protocol 9-1