User guide

Verifying the 802.1X Port Configuration Configuring 802.1X
page 21-10 OmniSwitch 6600 Family Network Configuration Guide April 2005
Configuring Accounting for 802.1X
To log 802.1X sessions, use the aaa accounting 802.1x command with the desired RADIUS server
names; use the keyword local to specify that the Switch Logging function in the switch should be used to
log 802.1X sessions. RADIUS servers are configured with the aaa radius-server command.
-> aaa accounting 802.1x rad1 local
In this example, the RADIUS server rad1 will be used for accounting. If rad1 becomes unavailable, the
local Switch Logging function in the switch will log 802.1X sessions. For more information about Switch
Logging, see Chapter 27, “Using Switch Logging.”
Verifying the 802.1X Port Configuration
A summary of the show commands used for verifying the 802.1X port configuration is given here:
For more information about the displays that result from these commands, see the OmniSwitch CLI Refer-
ence Guide.
show 802.1x Displays information about ports configured for 802.1X.
show 802.1x users Displays a list of all users (supplicants) for one or more 802.1X ports.
show 802.1x statistics Displays statistics about 802.1X ports.
show aaa authentication 802.1x Displays information about the global 802.1X configuration on the
switch.
show aaa accounting 802.1x Displays information about accounting servers configured for 802.1X
port-based network access control.