User guide

Open Problem Reports and Feature Exceptions
OmniSwitch 6600/7000/8800—Release 5.1.5.R04 page 89
PR 80757
Only a single client on a given port for a given multicast group is shown in the group membership displays
on the OS6600/7000.
Workaround: This is a result of the way IGMP clients respond to group membership queries. Only a
single client will respond in a flooded environment where all clients will see the report. If a client receives
a group membership report for the same group on its interface, it will not send its own membership report
as a result.
OSPF
Problem Reports
PR 55287
It is currently not possible to change the key-id for md5 authentication over OSPF virtual links on the
OS7000. It will always be 1.
Workaround: Please make sure that the adjacent router on the virtual link has the key-id configured also.
PR 56345
Cannot unload and reload OSPF on the OS7000.
Workaround: There is no known workaround at this time.
PR 58676
OSPF default cost is the same for fast ethernet and giga interface on the OmniSwitch 7700/7800.
Workaround: There is no known workaround at this time.
PR 59813
Loss of unicast traffic across a gigabit module fiber link between 2 OSPF routers results in not achieving
FULL adjacency on the OS7000/8800.
Workaround: There is no known workaround at this time.
PR 65617
OSPF stops advertising static routes to the network when the route tag is configured on a redistribution
filter on the OS7000.
Workaround: There is no known workaround at this time.