User guide

Open Problem Reports and Feature Exceptions
OmniSwitch 6600/7000/8800—Release 5.1.5.R04 page 87
OS7000/8800 Feature Exceptions
• The maximum number of total routes is 65K.
• The maximum number of RIP routes is 10K.
• The maximum number of OSPF routes is 40K.
• The maximum number of BGP routes is 65K.
• The maximum number of active traffic flows is 16K (based on current default cache allocation).
OS6600 Feature Exceptions
• The max number of total routes is 4K.
• The max number of RIP routes is 2K.
• The max number of OSPF routes is 4K.
• The max number of active traffic flows is 1K
BGP4
Problem Reports
PR 70681
Cannot use BGP4 route-map policy match-prefix (i.e. 0.0.0.0) to selectively apply (in/out bound) policy to
a subset of learned routes on the OS8800.
Workaround: Create another instance of the route-map policy and use a prefix-list of 0.0.0.0 (and mask
0.0.0.0) to allow all routes while the other instance applies the policy on the subset of learned routes.
PR 72024
BGP4 Dampening Suppress value cannot exceed the default Ceiling value of 1600 seconds on the
OS8800.
Workaround: Configure a Suppress value less than 1600 seconds.
PR 72300
Cannot use AS number with command: ip bgp confederation neighbor.
Workaround: There is no known workaround at this time.
Advanced Routing