User guide

Open Problem Reports and Feature Exceptions
page 48 OmniSwitch 6600/7000/8800—Release 5.1.5.R04
PR 54096
The ESM driver does not return a pause frame when traffic exceeds 100% into the port on the OS7000.
Workaround: There is no known workaround at this time.
PR 56817
The Rx Pause Frame counter does not increment when there is an incoming PAUSE frame on an OS7000/
8800.
Workaround: There is no known workaround at this time.
Interswitch Protocols (AMAP/GMAP)
Problem Reports
PR 80256
AOS switches are not forwarding AMAP hello packets when AMAP is disabled.
Workaround: There is no known workaround at this time.
IP Multicast Switching (IPMS)
Problem Reports
PR 57746
IP Multicast does not support hardware routing with 802.1Q service on the OS7000.
Workaround: There is no known workaround at this time.
PR 59814
If a multicast routing interface is "Oper-Status" enabled, not just "Admin-Status" enabled, then IPMS will
not be enabled silently on the OS7000. When the first multicast routing interface moves to the "enabled"
state, IPMS will be enabled silently.
Workaround: There is no known workaround at this time.