User guide

Open Problem Reports and Feature Exceptions
page 42 OmniSwitch 6600/7000/8800—Release 5.1.5.R04
PR 84052
WebView allows the user to try and reload network interfaces on OS7000/8800 chassis.
Workaround: There is no workaround at this time. The switch will report an error when attempting to
reload the network interface so there is no harm done. The option to reload network interfaces on the
OS8800 and OS7000 Series chassis’ will be removed in future builds.
PR 84091
WebView > Layer 2 > Vlan Mgmt > Vlan Configuration > Port-MAC Multicast MAC Addresses menu
option is not supported on the OS6600.
Workaround: Ignore.
PR 84151
With WebView on an OS6600 chassis, the Expanded View at the bottom of the VLAN Configuration/
VLAN table may refresh back to the Summary View instead of intended Expanded View when using
Netscape 4.79 on Solaris 2.9.
Workaround: Try Mozilla 1.4 or Netscape 7.1 on Solaris or use a Windows based system at this time.
PR 84250
In WebView, on the Physical > Health > Device page, the CMM Temperature might read 0 degrees
Celsius. This feature might not be supported.
Workaround: Please ignore the zero.
PR 84255
When doing multiple modifications on an OS7000, such as Layer 2 > Vlan Mgmt > VLAN Configuration
> Ports > Port Association > Move Ports, Only the first 64 ports of the entire selection will be associated.
A WebView dialog box comes up indicating that only the first 64 will be applied with the choice of
proceeding or cancelling.
Workaround: There is a design limitation, which allows only 64 entries to be modified at a time.
PR 84268
There are multiple bad hypertext links in the WebView help pages for Ethernet Accounting Input Statis-
tics and Ethernet Accounting Output Statistics whereby links will incorrectly take you from one help page
to the other.
Workaround: Do not use the hyperlinks. Please use the scroll bar.