User guide

Open Problem Reports and Feature Exceptions
page 30 OmniSwitch 6600/7000/8800—Release 5.1.5.R04
PR 87022
Entering "debug command-info enable", enter the command info mode. Trying to exit that mode is impos-
sible because the command "debug command-info disable" is not taking effect in command info mode.
Workaround: Exit from the session and then log on again.
RMON
Problem Reports
PR 55770
Duration and System Resources for RMON are not accessible via SNMP or WebView on the OS7000.
The RMON subsystem only shows the values for these objects using CLI.
Workaround: There is no known workaround at this time.
PR 87876
If rows are rapidly added/deleted on the RMON history table, the switch may reload.
Workaround: There is no known workaround at this time.
SNMP
Problem Reports
PR 43837
Each time an SNMP v3 Manager "discovers" a new switch, the switch SNMP agent reports a "time stamp
error" when answering the first v3 request on the OS7000.
Workaround: There is no known workaround at this time.
PR 50089/53442
When a GetNext request is sent on any object of the trapConfigTable, sessionConfigTable or trapFilterT-
able and if the index value equal to 4294967295, then the agent does not respond as expected; i.e. the
object returned is not lexicographically larger on the OS7000.
Workaround: There is no known workaround at this time.
PR 50404
Our system treats user name "admin" differently from other user names. It is defined for our system with
no SNMP access. This cannot be modified.
Workaround: There is no known workaround at this time.