User guide

Open Problem Reports and Feature Exceptions
page 28 OmniSwitch 6600/7000/8800—Release 5.1.5.R04
Open Problem Reports and Feature Exceptions
The problems listed here include problems known at the time of the product’s release. Any problems not
discussed in this section should be brought to the attention of the Alcatel Technical Support organization
as soon as possible. Please contact customer support for updates on problem reports (PRs) where no
known workaround was available at time of release.
Command Line Interface (CLI)
Problem Reports
PR 51249
The error message does not display the position of the errored keyword using "^" after one successful
command on the OS7000.
Workaround: Exit and re-enter the telnet session, the first error message will show up with the position
of the errored keyword.
PR 54887
Serial port information can be viewed from the WebView "Console Port Table" page, but not with CLI on
the OS7000.
Workaround: Use WebView to reference console port information.
PR 55576
When doing a config apply command, applications may not appear to be loaded on the OS7000.
Workaround: Applications must be manually loaded before doing a config apply. Loading them auto-
matically introduces many of problems that are not easily overcome.
PR 56593
Only one parameter can be modified when making changes to link aggregation on the OS7000.
Workaround: Execute the CLI command again for any further modifications.
PR 57355
With large image files, the zmodem (rz) CLI command will cause excessive "Bad CRC" errors and hang
up after a few percentage of data transferring on the OS7000. It also will not allow the user to select a
particular directory, such as /working or /certified, to download files to. It always downloads files to /flash
only.
Workaround: There is no known workaround at this time.
Switch Management