User guide

Open Problem Reports and Feature Exceptions
page 113
PR 84585
The interface may bounce for no apparent reason, i.e., the link did not go down. However, so far this has
happened very infrequently. It may be due to some internal chip access issue but needs to be monitored
and verified in next release.
Workaround: There is no known workaround at this time.
Power over Ethernet
Problem Reports
PR 79947
There is no support for driving LED's on ENI-P24 with 5.1.4.R05 release
Workaround: There is no known workaround at this time.
PR 83921
On occasion a message “i2c ReadOnBoardTemp ERROR Status Returned STR” will be displayed when
running a stack of 8 OS6600-P24.
Workaround: There is no known workaround at this time.
PR 84290
Hot swap on OS6600-P24 stack can cause the following non-fatal error to occur:
FRI JUL 16 16:02:26 : LANPOWER (108) error message:
+++ lpSocketSend: zcSendto Failed ret -6 size 532!
+++ lpSendPdData: Unable to send data to CMM
Workaround: No action necessary.
PR 84565
Capacitor Detection becomes disabled upon takeover on OS6600-P24. This will be noticeable when non-
compliant 802.3af devices are not powered up after takeover.
Workaround: Simply run lanpower <slot> capacitor-deteect command on primary.
PR 84710
On the OS6600, the identifiers returned are not in the correct format.
Workaround: None