User guide

Open Problem Reports and Feature Exceptions
page 111
OmniSwitch 8800 NIs
Problem Reports
PR 66750
OS8800 ENI encountered packet loss on Coronado.
Workaround: There is no known workaround at this time.
PR 67570
On the OS8-GNI-C8 incoming frames are accumulated by the statistics handler if and only if the port is
enabled. If the port is not enabled yet, any incoming frames will be dropped. As a result, statistics between
switch and traffic generator might be different.
Workaround: There is no known workaround at this time
PR 68883
When the speed is changed on ENI modules (10M to 100M or vice-versa), the far end is supposed to
detect this change if configured as auto. If it does not detect this condition, then the link will be down.
Workaround: Configure the far end or toggle the link status locally to restart the auto negotiation
process.
PR 69545
No GBIC information is shown when the show module long command is issued on an OS8-GNI-U24.
This is harmless and will not affect switch behavior.
Workaround: There is no known workaround at this time.
PR 76652
On OS8800 switches, when broadcast packets inflow to a port, if it is mixed with different sizes, some
smaller size packets could be dropped by the system.
Workaround: There is no known workaround at this time.
System