Specifications

60 Using WebView March 2005
Online Help
General online help is available through the main Help link
located in the top WebView banner:
Detailed, context-based help is provided for each status table
and configuration dialog window:
Additional Information
For more information on using WebView, refer to “Using
WebView” in the OmniSwitch 6600 Family Switch Manage-
ment Guide.
Troubleshooting
The WebView login screen does not display.
This suggests either a physical or network connection issue.
Try the following options:
• Be sure that you have a good physical Ethernet cable
connection to the switch.
• Be sure your computer has a valid Ethernet connection
and IP address.
• Verify that all required WebView image files are
installed in the current running directory. See page 57 for
more information.
The login screen displays, but my login attempt
fails.
This suggests either a user name and password or Authenti-
cated Switch Access error. Try the following options:
• Check that you are using the correct user name and
password. If you have already changed the user name and
password for your switch, be sure to use the new informa-
tion. If you have not changed the user name and password,
the factory defaults are admin and switch, respectively.
• Be sure that you have “unlocked” HTTP sessions on the
switch. To unlock HTTP sessions, enter the following
command:
-> aaa authentication http local
See page 34 for information on unlocking session types.
General Help Link
Context-specific Help
button.
(In this case, for the VLAN
Administration table.)