Specifications

March 2005 Verifying LED Status 31
SEC LED
The secondary role is given to the switch with the next-lowest
number.
To verify this, check the SEC LED on the front panel of the
switch with the next-lowest assigned slot number. The SEC
LED should be illuminated solid green.
Idle Status
All additional switches with higher numbers will be given idle
status. The PRI and SEC LEDs for these switches will be off.
For additional information on primary, secondary, and idle
roles within the stack, refer to the Hardware Users Guide.
Additional LED Descriptions. For complete descrip-
tions of OmniSwitch 6600 Family LED states, see page
67.