System information

Management Configuration
3-23
Port Traffic Class Information
This switch provides two priority levels with Weighted Fair Queuing for port egress.
This means that any frames with a default or user priority from 0~3 are sent to the
low priority queue “0” while those from 4~7 are sent to the high priority queue “1” as
shown in the following screen.
Management Configuration
You an use the VLAN Management screen to configure the management access of
the switch.
Parameter Description
Port Numeric identifier for switch port.
User Priority Shows that user priorities 0~3 specify the low priority queue and 4~7 specify the
high priority queue.
Class Range The priority queue classes available on this switch.
Parameter Description
CPU Join VLAN Allows management access of the switch from all VLANs or only from a specified
VLAN. If this field is set to “ONE” then the single VLAN with management acces
must be set in the “VLAN” field.
VLAN ID The ID of the single VLAN with management access to the switch, if the “CPU
Join VLAN” field is set to “ONE”.