System information

Upgrading Firmware via the Serial Port
A-3
3. After the file has been downloaded, the console screen will display information
similar to that shown below. Press “s” to start the management interface, change
the baud rate back to 9600, and press Enter. The Logon screen will then appear.
For details on managing the switch, refer to Chapter 2 for information on the
out-of-band console interface, or Chapter 3 for information on the Web interface.
XModem Download to DRAM buffer area 0x00200000: ... SUCCESS !
Verifying image in DRAM download buffer 0x00200000... SUCCESS !
Update FlashROM Image at 0x02880000 ... SUCCESS !
(D)ownload another Image or (S)tart Application: [S] s
Change Baud Rate to 9600 and Press <ENTER>.