Operation Manual

67 68
To activate/deactivate Data roaming
When roaming, you can decide to connect/disconnect to a data service.
•Drag down notification panel and touch to access Settings.
•Touch SIM management\Roaming\Data roaming�
•Touch to select from popup options: Disable, National Roaming only
and All Networks.
•When Data roaming is deactivated, you can still perform data exchange
with a Wi-Fi connection (refer to "7�1�2 Wi-Fi").
7�1�2 Wi-Fi
Using Wi-Fi, you can connect to the Internet when your tablet is within
range of a wireless network. Wi-Fi can be used on your tablet even without
a SIM card inserted.
To turn Wi-Fi on and connect to a wireless network
•Touch on quick setting panel to get to Settings.
•Touch the switch beside Wi-Fi to turn on/off Wi-Fi.
•Touch Wi-Fi, the detailed information of detected Wi-Fi networks is
displayed in the Wi-Fi networks section.
•Touch a Wi-Fi network to connect. If the network you selected is
secured, you are required to enter a password or other credentials (you
may contact your network operator for details). When finished, touch
Connect.
7
Getting connected ����������������
To connect to the internet with this tablet, you can use GPRS/EDGE/
WCDMA/LTE networks or Wi-Fi, whichever is most convenient.
7�1 Connecting to the Internet
7�1�1 GPRS/EDGE/WCDMA/LTE
The first time you turn on your tablet with SIM card inserted, it will
automatically configure network service: GPRS, EDGE WCDMA or LTE.
If the network is not connected, you can touch on quick setting panel.
To check the network connection you are using, then touch Settings\
More���\Mobile networks\Access Point Names or Network
operators�
To create a new access point
A new GPRS/EDGE/WCDMA/LTE network connection can be added to
your tablet with the following steps:
•Drag down notification panel and touch to access Settings.
•Touch More���\Mobile networks\Access Point Names
•Touch Menu key and select New APN.
•Enter the required APN information.
•When finished, touch the Menu key and select Save.