Operation Manual

35 36
4�1�6 Call settings
Touch the Menu key and select Settings from Dial screen, the following
options are available:
Voice call
• Voicemail
Service Opens a dialog box where you can select your
carrier’s voicemail service or another service.
Voicemail settings If you are using your carrier’s voicemail service,
this opens a dialog box where you can enter the
phone number to use for listening to and managing
your voicemail. You can enter a comma (,) to insert
a pause into the number — for example, to add a
password after the phone number.
• IP prefix number
Touch to set your network operator prefix number for IP dialling.
• Call forwarding
Touch to configure how your calls are forwarded when you are busy,
unanswered or unreachable.
• Additional settings
Caller ID You are prompt to use default operator settings
to display your phone number in outgoing calls.
Call waiting Mark the checkbox to notify you of a new
incoming call.
Call waiting status Check the call waiting status of your tablet.
4�1�5 Managing multiple calls
With this tablet you can handle multiple calls at the same time.
Swap calls
When you accept two calls, touch icon , you can now switch between
two lines. The current call is put on hold and you have joined in the other
call.
Conference calls
(1)
You can set up a conference call.
•Place a call to the first participant of the conference call.
•Touch icon .
•Enter the phone number of the person you want to add to conference and
touch icon � You can also add participants from People or Call log.
•Touch to end the conference call and disconnect all callers.
(1)
Depending on your network operator.