Installation guide

Alcatel-Lucent OmniTouch UC R5.1 Technical Release Notes R5.1.000.586

Technical Communication 1109

Edition 7 – Page 22

2.2 Software locks OmniPCX side

For users distributed in a PBX network, following software locks are necessary OmniPCX side:

Values of 116, 117, 119, 129, 309 and 166 locks should be equal to “e-CS Engine” (13) with a

maximum value of 5000.

Values of “CSTA_Bypass” (158) should be equal to 2 X “e-CS Engine” with a maximum value of

6000.

OXE pbx locks eCC in PBX mode

There is no longer Gateway mode. So only integrated mode is supported. « eCC integrated »

license leads to following locks and provisionning :

Lock label Lock number Quantity/Value Set by

e-CS Engine 13 calculated Associated license

Centralized VPS 97 = 9999 UMA

CSTA Bypass (**) 158 500 Associated license

SIP Gateway 185 1 UMA

ECC Gateway 313 2 Associated license

RSI eCC (*) SP_RSI_agent_max remanent 2 Initrem

SIP Voice Mail Access 337 calcul UMA

(*) Init of this value is defined in document [3.].

(**) CSTA_Bypass locks allow virtual Z sets monitoring.

OXE PBX Locks for XML PBX Management service

Licenses number of “XML PBX Management service” have to be superior or equal to the total sum of

the “eCS-engine” locks in the installation.

By-pass of 4635 and 4645 software locks: software locks 314 (4635) and 194 (4645) are

by-passed on OmniPCX side if Messaging services licenses were bought for the Alcatel-Lucent

OmniTouch UC software.