User guide

Working With Configuration Files Quick Steps for Applying Configuration Files
OmniSwitch AOS Release 8 Switch Management Guide May 2014 page 5-5
Setting an Application Session for a Specified Time Period
You can set a future timed session to apply a configuration file after a specified period of time has elapsed.
In the following example, the amzncom_cfg.txt will be applied after 6 hours and 15 minutes have
elapsed.
1 Verify that there are no current timer sessions pending on the switch.
-> show configuration status
File configuration: none scheduled
2 Apply the file by executing the configuration apply command using the in keyword with the relevant
time frame specified.
-> configuration apply amzncom_cfg.txt in 6:15
3 To verify that the switch received this configuration apply request, enter the
show configuration status command. The display is similar to the one shown here.
-> show configuration status
File configuration </flash/working/amzncom_cfg.txt>: scheduled at 03/07/10 05:02