User guide

Managing CMM Directory Content Managing Switch Configurations
OmniSwitch AOS Release 8 Switch Management Guide May 2014 page 3-13
Show Currently Used Configuration
Depending on how a a switch is booted different directories can become the RUNNING DIRECTORY.
See “Where is the Switch Running From?” on page 3-4. for additional information.
To check the directory from where the switch is currently running, enter the following command:
-> show running-directory
CONFIGURATION STATUS
Running CMM : MASTER-PRIMARY,
CMM Mode : VIRTUAL-CHASSIS MONO CMM,
Current CMM Slot : CHASSIS-1 A,
Running configuration : WORKING,
Certify/Restore Status : CERTIFY NEEDED
SYNCHRONIZATION STATUS
Running Configuration : NOT SYNCHRONIZED,
Show Switch Files
The files currently installed on a switch can be viewed using the show microcode command. This
command displays the files currently in the specified directory.
To display files on a switch, enter the show microcode command with a directory, as shown:
-> show microcode certified
Package Release Size Description
-----------------+---------------+--------+-----------------------------------
Uos.img 8.1.1.99.R01 2486643 Alcatel-Lucent OS
If no directory is specified, the files that have been loaded into the running configuration are shown.