User guide

Verifying Login Settings Logging Into the Switch
page 1-22 OmniSwitch AOS Release 8 Switch Management Guide May 2014
Verifying Login Settings
To display information about login sessions, use the following CLI commands:
For more information about these commands, refer to the OmniSwitch AOS Release 8 CLI Reference
Guide.
who Displays all active login sessions (e.g., console, Telnet, FTP, HTTP,
Secure Shell, Secure Shell FTP).
whoami Displays the current user session.
show session config Displays session configuration information (e.g., default prompt, ban-
ner file name, inactivity timer, login timer, login attempts).
show dns Displays the current DNS resolver configuration and status.
system fips admin-state Enable or disable the FIPS mode on the switch.
show system fips Show the Configured and Running status of the FIPS mode on the
Switch.
user Configures or modifies user entries in the local user database. Use the
no form of the command to remove the user from the local database.
show user Displays information about all users or a particular user configured in
the local user database on the switch.