User guide

OmniSwitch AOS Release 8 Switch Management Guide May 2014 Index-1
Index
Symbols
!! command 4-6
A
aaa authentication command 7-7, 7-8, 7-9, 8-4
aaa radius-server command 7-7
accounting
for Authenticated Switch Access 7-11
application examples
applying configuration files 5-4
Authenticated Switch Access 7-7
CMM 3-5
configuration file 5-2
dynamic link aggregation 13-5
Emergency Restore 3-16
file management 2-16
logging into the switch 1-3
network administrator user accounts 6-6
NTP 11-3
Server Load Balancing 10-27
SNMP 9-3
Trap Filters 9-4
WebView 8-4
applying configuration files
application examples 5-4
ASA
see Authenticated Switch Access
ASA Configuration
verify information about 7-12
Authenticated Switch Access 7-4
accounting 7-11
application examples 7-7
management interfaces 7-9
authentication
MD5 9-10
SHA 9-10
traps 9-13
Automatic Remote Configuration 12-5
Bootup Configuration File 12-12
Debug Configuration File 12-12
Firmware upgrade Files 12-12
Instruction File 12-12
Script File 12-12
Troubleshooting 12-21
Automatic Remote Configuration network components 12-6
TFTP File Server 12-6
B
banner
login 1-16
pre-login text 1-17
boot.cfg file 3-3
C
cd command 2-8
certified directory 3-4
copying to working directory 3-14
Chassis Management Module
see CMM
chmod command 2-10
CLI 4-1, 10-1
domains and families 6-15
logging commands 4-7–4-8
specifications 4-2, 10-2
CLI usage
verify information about 4-10
CMM 3-1
application examples 3-5
boot.cfg file 3-3
cancelling a reboot 3-9, 3-11
certified directory 3-4
checking reboot status 3-9
configuration files 3-3
copying
certified directory to working
directory 3-14
running configuration to working
directory 3-10
displaying current configuration 3-13
displaying switch files 3-13
image files 3-3
rebooting 3-8
rebooting from the working directory 3-11, 3-14
running configuration 3-4
scheduling a reboot 3-9
specifications 3-2
swapping primary for secondary 3-14
synchronizing primary and secondary 3-14
working directory 3-4
CMM Conditions
verify information about 3-16
CMM scenarios 3-5
lost running configuration 3-5
rollback to previous software 3-7
running configuration saved to working directory 3-6
working directory saved to certified directory 3-6
Command Line Interface
see CLI
community strings 9-9
configuration apply command 5-2, 5-4
for a specific timeperiod 5-5
configuration cancel command 5-7
configuration error-file limit command 5-7
configuration file
application examples 5-2
specifications 5-2