User guide

SNMP Traps Table
page B-44 OmniSwitch AOS Release 8 Switch Management Guide May 2014
175 chasTrapsNiBPSFETStateChange physicalIndex,
chasTrapsB-
PSSystem-
FETChange,
chasTrapsBPS-
PoeFETChan
ge
chassis This trap is sent when there is a
BPS FET change of state.
physicalIndex—The physical index of the involved object.
chasTrapsBPSSystemFETChange—An enumerated value indicating the BPS FET state.
chasTrapsBPSPoeFETChange—An enumerated value indicating the PoE FET state.
176 alaDhcpBindingDuplicateEntry dhcpSnooping-
Binding-
MacAddress,
dhcpSnooping-
BindingVlan,
dhcpSnooping-
BindingIfIn-
dex,
ip-helper This trap is sent when there is a
MAC movement in the DHCP-
Binding Table.
dhcpSnoopingBindingMacAddress—The MAC Address sub-index identifying this instance.
dhcpSnoopingBindingVlan—The DHCP client VLAN.
dhcpSnoopingBindingIfIndex—The the interface from which the DHCP request is coming.
177 alaVCSPProtectionTrap alaVCSPTable-
ChassisID
vcm This trap is sent when a virtual
chassis enters into VCSP Protec-
tion state
alaVCSPTableChassisID—The virtual chassis ID (1 - 8).
178 alaVCSPRecoveryTrap alaVCSPTable-
ChassisID
vcm This trap is sent when a virtual
chassis enters into VCSP Active
state
alaVCSPTableChassisID—The virtual chassis ID (1 - 8).
179 pethPsePortOnOffNotification NA module This trap is sent to indicate
whether or not the PSE Port is
delivering power to the PD. This
notification SHOULD be sent on
every status change except in the
searching mode.
NA
180 pethMainPowerUsageOnNotification NA module This trap is sent to indicate that
the PSE Threshold usage indica-
tion is on, the usage power is
above the threshold. At least 500
msec must elapse between notifi-
cations being emitted by the
same object instance.
NA
No. Trap Name Objects Family Description