User guide

SNMP Traps Table
OmniSwitch AOS Release 8 Switch Management Guide May 2014 page B-41
167 smgrServiceStatusChange alaSvcId,
alaSvcType,
alaSvcOperSta-
tus,
alaSvcIsid,
alaSvcBVlan,
alaSvcMulti-
castMode
svcmgr This trap is sent when there is a
change in service operating sta-
tus. A service is operationally up
when it's admin-up and there's at
least one active SAP or one
active bind that is operationally
up.
alaSvcId—The unique Service identifier.
alaSvcType—The Service Type (e.g. VPLS, SPB).
alaSvcOperStatus—The operating state of the Service. The requirements for a Service to be operationally up
depend on the Service Type: TLS Services are 'up' when the Service is administratively up and either at least
two SAP's or spoke SDP Bind's, or one SAP or spoke SDP Bind and at least one mesh SDP Bind are operation-
ally up.
alaSvcIsid—The I-Domain Service Identifier (I-SID) which identifies the Service instance in a PBB network
on a BEB switch. For a customer packet flowing toward the B-Domain, the I-SID is derived from the VFI and
inserted into the packet. For a packet flowing from B-Domain, the I-SID is used to identify the VFI for the i-
domain processing.
alaSvcBVlan—The Backbone VLAN ID (BVLAN), which defines the B-Domain for the PBB traffic.
alaSvcMulticastMode—The multicast replication mode for the service (Head End/Tandem).
168 smgrSapStatusChange alaSvcId,
alaSapPortId,
alaSapEn-
capValue,
alaSapOperSta-
tus
svcmgr This trap is sent when there is a
change in SAP operating status.
A SAP is operationally up when
it's admin-up and the link status
of the physical or logical port of
the SAP is operationally up.
alaSvcId—The unique Service identifier.
alaSapPortId—The tThe ID of the access port where the SAP is defined.
alaSapEncapValue—The value of the label used to identify the SAP on the access port.
alaSapOperStatus—The SAP operational status on the port:
•
up
• down
• ingressQosMismatch
• egressQosMismatch
• portMtuTooSmall
• svcAdminDown
• iesIfAdminDown
169 smgrSdpStatusChange alaSdpId,
alaSdpOperSta-
tus,
alaSdpNetwork-
Port,
alaSdpBVlan,
alaSdpSys-
temId,
alaSdpSystem-
Name,
alaSdpDynam-
icType,
alaSdpIsid
svcmgr This trap is sent when there is a
change in SDP operating status.
For SPB, the SDP is dynamically
created or destroyed as calcu-
lated by ISIS protocol when a
unicast/multicast path to reach a
neighbor node is determined.
No. Trap Name Objects Family Description