User guide

SNMP Traps Table
page B-20 OmniSwitch AOS Release 8 Switch Management Guide May 2014
multiChassisTrapVFL—The multi-chassis Virtual Fabric Link interface.
multiChassisTrap VFLMemberPort—The multi-chassis VFL member port number.
multiChassisTrapDiagnistic—The reason a port configured as virtual-fabric member is unable to join the vir-
tual-fabric link - 1. Duplex Mode, 2. Speed.
84
alaDHLVlanMoveTrap
alaDHLSes-
sionID,
alaDHLPort-
From,
alaDHLPortTo,
alaDHLVlan-
MoveReason
vlan When linkA or linkB goes down
or comes up and both ports are
are part of some vlan-map, this
trap is sent to the Management
Entity, with the DHL port infor-
mation.
alaDHLSessionID—The DHL Session ID for which alaDHLVlanMoveTrap needs to be sent to the Manage-
ment Entity.
alaDHLPortFrom—The the port, either linkA or linkB, from whichvlan-mapped vlans have joined to other
port due to linkUp or linkDown as specified by alaDHLVlanMoveReason.
alaDHLPortTo—The the port, either linkA or linkB, to which vlan-mapped vlans have joined from other port
due to linkUp or linkDown as specified by alaDHLVlanMoveReason
alaDHLVlanMoveReason—The reason for Vlan Movement from one port to another port.
85 alaDhcpClientAddressAddTrap alaDhcpClient
Address
udp relay This trap is sent when a new IP
address is assigned to DHCP Cli-
ent interface.
alaDhcpClientAddress—The current IP address of the DHCP client.
86
alaDhcpClientAddressExpiryTrap
ialaDhcpClien-
tAddress
ip-helper This trap is sent when the lease
time expires or when a DHCP
client unable to renew/rebind an
IP address.
alaDhcpClientAddress—The current IP address of the DHCP client.
87
alaDhcpClientAddressModifyTrap
alaDhcpClien-
tAddress,
alaDhcpClient-
NewAddress
ip-helper This trap is sent when the DHCP
client unable to obtain the exist-
ing IP address and a new IP
address is assigned to the DHCP
client.
alaDhcpClientAddress—The current IP address of the DHCP client.
alaDhcpClientNewAddress—The new IP address assigned to the DHCP client.
88 vRtrIsisDatabaseOverload vRtrIsisSystem-
Leve
lisisSysL1 State
isisSysL2 State
isis This trap is sent when the system
enters or leaves the Overload
state.
vRtrIsisSystemLevel—Identifies the level to which the notification applies.Routing within an area is referred
to as Level-1 routing. Routing between two or more areas is referred to as Level 2 routing. Each area runs a sep-
arate copy of the basic link-state routing algorithm.
isisSysL1State—Level 1 Routing (1)
isisSysL2State—Level 2 Routing (2)
No. Trap Name Objects Family Description