User guide

SNMP Traps Table
page B-10 OmniSwitch AOS Release 8 Switch Management Guide May 2014
31 alaDoSTrap alaDoSType
alaDoSDetected
ip Indicates that the sending agent
has received a Denial of Service
(DoS) attack.
alaDoSType—Index field for the alaDoSTable. Integer indicating the DoS Type: 0=portscan, 1=tcpsyn,
2=pingofdeath, 3=smurf, 3=pepsi, 5=land and 6=teardropBonkBoink.
alaDoSDetected—Number of attacks detected
pethMainPseConsumptionPower—Measured usage power expressed in Watts.
32 ospfNbrStateChange ospfRouterId
ospfNbrIpAddr
ospfNbrAd-
dressLessIn-
dex
ospfNbrRtrId
ospfNbrState
ospf Indicates a state change of the
neighbor relationship.
ospfRouterId—A 32-bit integer uniquely identifying the router in the Autonomous System. By convention, to
ensure uniqueness, this should default to the value of one of the router’s IP interface addresses.
ospfNbrIpAddr—The IP address this neighbor is using in its IP Source Address. Note that, on address-less
links, this will not be 0.0.0.0, but the address of another of the neighbor’s interfaces.
ospfNbrAddressLessIndex—On an interface having an IP Address, zero. On address-less interfaces, the cor-
responding value of ifIndex in the Internet Standard MIB. On row creation, this can be derived from the
instance.
ospfNbrRtrId—A 32-bit integer (represented as a type IpAddress) uniquely identifying the neighboring router
in the Autonomous System.
ospfNbrState—The State of the relationship with this Neighbor.
33 ospfVirtNbrStateChange ospfRouterId
ospfVirtN-
brArea
ospfVirtNbrR-
trId
ospfVirtN-
brState
ospf Indicates a state change of the
virtual neighbor relationship.
ospfRouterId—A 32-bit integer uniquely identifying the router in the Autonomous System. By convention, to
ensure uniqueness, this should default to the value of one of the router's IP interface addresses.
ospfVirtNbrArea—The Transit Area Identifier.
ospfVirtNbrRtrId—A 32-bit integer uniquely identifying the neighboring router in the Autonomous System.
ospfVirtNbrState—The state of the Virtual Neighbor Relationship.
34 lnkaggAggUp traplnkaggId
traplnkaggPor-
tIfIndex
linkaggre-
gation
Indicates the link aggregate is
active. This trap is sent when any
one port of the link aggregate
group goes into the attached
state.
traplnkaggId—Index value of the Link Aggregate group.
traplnkaggIfIndex—Port of the Link Aggregate group.
35 lnkaggAggDown traplnkaggId
traplnkaggPor-
tIfIndex
linkaggre-
gation
Indicates the link aggregate is not
active. This trap is sent when all
ports of the link aggregate group
are no longer in the attached
state.
traplnkaggId—Index value of the Link Aggregate group.
traplnkaggIfIndex—Port of the Link Aggregate group.
No. Trap Name Objects Family Description