User guide

Managing Automatic Remote Configuration Download Automatic Remote Configuration Download Process
OmniSwitch AOS Release 8 Switch Management Guide May 2014 page 12-11
Additional Process Notes
1 Once the switch obtains an IP interface from the DHCP server, remote access through SSH is
automatically configured to allow remote access in case of any download errors during the Auto
Configuration process.
Note. It is not recommended to have the write memory command in the script file if a configuration file
is downloaded. This causes the vcboot.cfg file to be overwritten with the commands in the script file.
2 After the successful download of the script file, the DHCP IP interface is automatically deleted.
However, SSH access remains enabled. Use the no aaa authentication ssh command to disable SSH
connectivity if desired.