Specifications

August 2011 Using WebView 17
OmniSwitches can be configured and monitored using
WebView, Alcatel-Lucent’s web-based device management
tool.
Logging In to WebView
Note. Before attempting to establish a WebView session,
be sure that you have first unlocked the HTTP session
type using the aaa authentication command. Otherwise, a
login error will occur. See “Unlocking Session Types” on
page 14 for more information.
To access WebView and log in to a switch:
1 Enter the switch’s IP address in your web browser. If a
certificate warning error occurs, accept the certificate and
allow the page to load. The login screen displays.
2 Next, enter the user name and password at the login
prompt.
Navigating WebView
After you have successfully logged in, the Chassis
Management home page displays.
The Chassis Management home page provides a physical
representation of the switch as well as basic system
information. This is the main launching point for WebView.
Note. For more information on using WebView, refer to
the OmniSwitch AOS Release 7 Switch Management
Guide.
Using WebView