Specifications

8 Installing the Hardware August 2011
3 Once the notches have grasped the rail, press the
extractor lever upward until the module is firmly seated.
4 Once the module is firmly seated, secure the module to
the chassis by tightening the captive screw.
Installing Transceivers
For detailed information on installing transceivers, refer to the
OmniSwitch AOS Release 7 Transceivers Guide.
Installing Fan Trays
1 Insert the tray into the chassis slot and slide it straight
back until it meets the chassis backplane connectors.
2 When the fan tray is firmly seated, tighten the two
captive screws at the left and right sides of the fan tray’s
front panel.