User guide

40-Gigabit QSFP+ Transceivers Small Form-Factor Pluggables (SFP/SFP+/QSFP+)
page 1-20 OmniSwitch AOS Release 7 Transceivers Guide March 2015
1. Check for availability of lengths.
2. The QSFP-40G-C7 (7m) cable has been verified for proper operation when connected between OmniS-
witch products. When connecting this cable between an OmniSwitch and other vendors’ equipment, it’s
recommended to verify proper operation prior to network deployment.
Example MPO Splitter Cable
QSFP-40G-C
Four channel 40-Gigabit QSFP+ Direct Attach Copper Cable
Connector Type Direct Attached Copper
Standards Supported 802.3ba, QSFP+ MSA
Cable Length 1m, 3m, 7m
1,2
Wire Gauge 26AWG
Bend Radius 1.69 in.
Digital Diagnostic Monitoring Not Supported
QSFP-4X10G-SR
Four channel 40-Gigabit QSFP+ Optical Transceiver. Connects a single 40G QSFP+ port to four 10G SFP+
ports
Connector Type MPO
Standards Supported 802.3ba, 802.3ae, QSFP+ MSA
Connections supported 40GBase-SR4, 10GBase-SR
Fiber Type MMF
Wavelength 850 nm
Optical Power Output -7.5 to +0.5 dBm
Receiver Sensitivity -7.5 dBm (SRS)
Transmission Distance OM3 - ~ 300 m
OM4 - ~400 m
Operating Temperature 0 ºC to 70ºC
Maximum Power Consumption 1.5 W
Digital Diagnostic Monitoring Supported