User guide

OmniSwitch 9000E Series SFP Compatibility Matrix
page 4-42 OmniSwitch Transceivers Guide January 2013
OmniSwitch 9000E Series
The following table shows the Ethernet transceiver configurations and minimum release required for
support on the OmniSwitch 9000E Series:
1. Speed must be hardcoded to 1000 Mbits for support on OS9-XNI-U12E.
2. Supports 10/100/1000 Mbits.
SFP OS9-GNI-U24E OS9-XNI-U12E
SFP-GIG-SX
1
6.4.1 6.4.4
SFP-GIG-LX
1
6.4.1 6.4.4
SFP-GIG-LH40
1
6.4.1 6.4.4
SFP-GIG-LH70
1
6.4.1 6.4.4
SFP-GIG-EXTND
1
6.4.1 6.4.4
SFP-GIG-CWD
1
6.4.1 6.4.4
SFP-GIG-T
1,2
6.4.1 6.4.4
SFP-GIG-EZX 6.4.5 Not Supported
SFP-DUAL-MM 6.4.1 Not Supported
SFP-DUAL-SM10 6.4.1 Not Supported
SFP-DUAL-BX-D 6.4.5 Not Supported
SFP-DUAL-BX-U 6.4.5 Not Supported
SFP-100-BX20LT Not Supported Not Supported
SFP-100-BX20NU Not Supported Not Supported
SFP-100-BXLC-D Not Supported Not Supported
SFP-100-BXLC-U Not Supported Not Supported
SFP-100-LC-MM Not Supported Not Supported
SFP-100-LC-SM15 Not Supported Not Supported
SFP-100-LC-SM40 Not Supported Not Supported
SFP-GIG-BX-D 6.4.1 6.4.4
SFP-GIG-BX-U 6.4.1 6.4.4
SFP-GIG-BX-D20 6.4.4 6.4.4
SFP-GIG-BX-U20 6.4.4 6.4.4
SFP-GIG-BX-D40 6.4.4 6.4.4
SFP-GIG-BX-U40 6.4.4 6.4.4
SFP-10G-SR Not Supported 6.4.3
SFP-10G-LR Not Supported 6.4.3
SFP-10G-ER Not Supported 6.4.3
SFP-10G-LRM Not Supported 6.4.3
SFP-10G-GIG-SR Not Supported 6.4.5
SFP-10G-C Not Supported 6.4.3