User guide

In This Chapter Industrial Small Form Factor Pluggables (iSFPs)
page 2-22 OmniSwitch Transceivers Guide January 2013
2 Industrial Small Form
Factor Pluggables (iSFPs)
OmniSwitch Series switches use both copper-based and fiber-based optical Industrial Small Form Factor
Pluggable (SFP) transceivers. SFPs are fully hot-swappable and are available for both short-reach and
long-reach applications. Additionally, Industrial SFPs are designed to operate at an increased temperature
range. Copper-based and fiber-based optical SFPs can be mixed on the same module.
In This Chapter
This chapter describes the technical specifications for all the OmniSwitch supported iSFP transceivers. For
additional details about OmniSwitch modules, see the appropriate OmniSwitch Hardware Guide.
iSFP specifications in this chapter include:
• Industrial Gigabit Ethernet Transceivers. See
“Industrial Gigabit Ethernet Transceivers” on page 2-23.
• Industrial Bi-directional Ethernet Transceivers. See
“Industrial Bi-directional Ethernet Transceivers”
on page 2-26
.
• Industrial 100-FX Ethernet Transceivers. See
“Bi-directional Ethernet Transceivers (cont.)” on
page 2-27
.
• Industrial 10-Gigabit Ethernet Transceivers. See
“Industrial 10-Gigabit SFP+ Transceivers” on
page 2-31
For information on installing and managing OmniSwitch hardware, see the appropriate OmniSwitch Hard-
ware Guide.
For information on OmniSwitch SFP compatibility, see
“SFP Compatibility Matrix” on page 4-40.