User guide

OmniSwitch AOS Release 7 Switch Management Guide March 2015 Index-1
Index
Symbols
!! command 5-6
A
aaa authentication command 8-7, 8-8, 8-9, 9-4
aaa radius-server command 8-7
accounting
for Authenticated Switch Access 8-11
application examples
applying configuration files 6-4
Authenticated Switch Access 8-7
CMM 4-5
configuration file 6-2
dynamic link aggregation 12-5
Emergency Restore 4-22, 4-23
file management 3-16
logging into the switch 2-3
network administrator user accounts 7-6
NTP 15-3
Server Load Balancing 11-30
SNMP 10-4
Trap Filters 10-5
WebView 9-4
applying configuration files
application examples 6-4
ASA
see Authenticated Switch Access
ASA Configuration
verify information about 8-12
Authenticated Switch Access 8-4
accounting 8-11
application examples 8-7
management interfaces 8-9
authentication
MD5 10-11
SHA 10-11
traps 10-14
Automatic Remote Configuration 13-6
Bootup Configuration File 13-12
Debug Configuration File 13-12
Firmware upgrade Files 13-12
Instruction File 13-12
Script File 13-12
Troubleshooting 13-20
Automatic Remote Configuration network components 13-7
TFTP File Server 13-7
B
banner
login 2-14
pre-login text 2-15
boot.cfg file 4-3
C
cd command 3-8
certified directory 4-4
copying to working directory 4-18
Chassis Management Module
see CMM
chmod command 3-10
CLI 5-1, 11-1
domains and families 7-15
logging commands 5-7–5-8
specifications 5-2, 11-2
CLI usage
verify information about 5-10
CMM 4-1
application examples 4-5
boot.cfg file 4-3
cancelling a reboot 4-12, 4-14, 4-17
certified directory 4-4
checking reboot status 4-12
configuration files 4-3
copying
certified directory to working directory 4-18
running configuration to working directory 4-13
displaying current configuration 4-16, 4-20
displaying switch files 4-16
image files 4-3
managing 4-11
rebooting 4-11, 4-17
rebooting from the working directory 4-14, 4-18
running configuration 4-4
scheduling a reboot 4-12, 4-17
specifications 4-2
swapping primary for secondary 4-19
synchronizing primary and secondary 4-18
working directory 4-4
CMM Conditions
verify information about 4-23
CMM scenarios 4-5
lost running configuration 4-5
rollback to previous software 4-7
running configuration saved to working directory 4-6
working directory saved to certified directory 4-6
Command Line Interface
see CLI
community strings 10-10
configuration apply command 6-2, 6-4
for a specific timeperiod 6-5
configuration cancel command 6-7
configuration error-file limit command 6-7
configuration file
application examples 6-2
specifications 6-2