User guide

SNMP Traps Table
OmniSwitch AOS Release 7 Switch Management Guide March 2015 page B-45
183 alaAppMonAppRecordFileCreated NA application
monitoring
This trap is sent after the applica-
tion records monitored in the past
hour are written to the flash file.
NA
184 alaAppMonFlowRecordFileCreated NA application
monitoring
This trap is sent after the pre-
configured number of application
monitoring flow records are writ-
ten to the flash file.
NA
185 alaDPIFlowRecordFileCreated NA deep packet
inspection
This trap is sent after the pre-
configured number of deep
packet inspection flow records
are written to the flash file.
NA
186 alaLbdStateChangeToShutdown alaLbdPortIfIn-
dex,
alaLbdPrevi-
ousState,
alaLbdCurrent-
State
load bal-
ancing
This trap is sent when a port is
shut down.
alaLbdPortIfIndex—The ifIndex on which the load balancing trap was raised.
alaLbdPreviousState—The previous state of the port on which load balancing was running.
alaLbdCurrentState—The current state of the port on which load balancing was running.
187 alaLbdStateChangeForClearViolation-
All
alaLbdPortIfIn-
dex,
alaLbdPrevi-
ousState-
ClearViolatio
nAll,
alaLbdCurrent-
StateClearVi-
olationAll
load bal-
ancing
This trap is sent when the port
state changes from shutdown due
to “clear-violation-all”.
alaLbdPortIfIndex—The ifIndex on which the load balancing trap was raised.
alaLbdPreviousState—The state of the port where LBD was running before clear-violation-all applied.
alaLbdCurrentState—The state of the port where LBD was running after clear-violation-all applied.
188 alaLbdStateChangeForAutoRecovery alaLbdPortIfIn-
dex,
alaLbdPrevi-
ousStateAu-
toRecovery,
alaLbdCurrent-
StateAutoRe-
covery
load bal-
ancing
This trap is sent when a port state
changes from shutdown due to
the auto-recovery mechanism.
alaLbdPortIfIndex—The ifIndex on which the load balancing trap was raised.
alaLbdPreviousStateAutoRecovery—The state of the port where LBD was running before auto-recovery.
alaLbdCurrentStateAutoRecovery—The state of the port where LBD was running after auto-recovery.
189 alaAutoConfigAutoFabricEnableTrap NA This object specifies the thresh-
old status of subnet utilization?
NA
No. Trap Name Objects Family Description