User guide

SNMP Traps Table
page B-40 OmniSwitch AOS Release 7 Switch Management Guide March 2015
physicalIndex—The physical index of the involved object.
160 alaSIPSnoopingCallRecordsFile-
Moved
alaSIPSnoop-
ingThreshold-
NumberOfCa
lls
sip snoop-
ing
This trap is sent when the SIP
Snooping Ended Call Records
flash file is moved from /flash/
switch/sip_call_record.txt to /
flash/switch/sip_call_re-
cord.txt.old. This happens when
the configured call record storage
limit is reached and possibly at
boot-up if /flash/switch/sip_-
call_record.txt from previous run
exists at the first check.
alaSIPSnoopingThresholdNumberOfCalls—The number of call records that can be stored on the device
(Range = 50 - 500, Default = 200).
161 alaIPv6NeighborLimitExceeded alaIPv6Neigh-
borLimit
ipv6 This trap is sent when the sys-
tem-wide neighbor cache limit is
exceeded.
alaIPv6NeighborLimit—The system-wide maximum size of the neighbor cache. A value of 0 indicates that no
limit will be enforced. The minimumvalue is 200 entries.
162 alaIPv6NeighborVRFLimitExceeded alaVirtualRout-
erName,
alaIPv6Neigh-
borVRFLimit
ipv6 This trap is sent when a per-VRF
neighbor cache limit is exceeded.
alaVirtualRouterName—The neighbor router name.
alaIPv6NeighborLimit—The system-wide maximum size of the neighbor cache. A value of 0 indicates that no
limit will be enforced. The minimumvalue is 200 entries.
163 alaIPv6InterfaceNeighborLimitExceed ipv6IfIndex,
alaIPv6Neigh-
borVRFLimit
ipv6 This trap is sent when a per-inter-
face neighbor cache limit is
exceeded.
ipv6IfIndex—The ipv6IfIndex.
alaIPv6NeighborLimit—The system-wide maximum size of the neighbor cache. A value of 0 indicates that no
limit will be enforced. The minimumvalue is 200 entries.
164 alaDyingGaspTrap alaDying-
GaspSlot,
alaDyingGasp-
PowerSupply-
Type,
alaDyingGasp-
Time
interface This trap is sent when a switch
has lost all power.
alaDyingGaspSlot—The slot number of the chassis whose NI is going down.
alaDyingGaspPowerSupplyType—The type of the power supply.
alaDyingGaspTime—The time of the failure.
165 alaDhcpSrvLeaseUtilizationThreshold alaDhcpSrv-
LeaseThresh-
oldStatus,
alaDhcpSrv-
SubnetDescrip-
tor
dhcpsrv This trap is sent when the lease
utilization on a subnet exceeds or
falls below the configured
threshold value.
No. Trap Name Objects Family Description