User guide

SNMP Traps Table
OmniSwitch AOS Release 7 Switch Management Guide March 2015 page B-39
156 alaSIPSnoopingACLPreemptedBySO-
SCall
physicalIndex,
alaSIPSnoopin-
gEndedCallI-
pAddrA,
alaSIPSnoopin-
gEndedCallI-
pAddrB,
alaSIPSnoopin-
gEnded-
CallL4portA,
alaSIPSnoopin-
gEnded-
CallL4portB
sip snoop-
ing
This trap is sent when a SIP
snooping RTP/RTCP ACL entry
is preempted by an SOS call.
physicalIndex—The physical index of the involved object.
alaSIPSnoopingEndedCallIpAddrA—The Ended Call IP address for direction A to B.
alaSIPSnoopingEndedCallIpAddrB—The Ended Call IP address for direction B to A.
alaSIPSnoopingEndedCallL4portA—The Ended call L4port for call direction A to B.
alaSIPSnoopingEndedCallL4portB—The Ended call L4port for call direction A to B.
157 alaSIPSnoopingRTCPOverThreshold alaSIPSnoopin-
gActiveCallI-
pAddrA,
alaSIPSnoopin-
gActiveCallI-
pAddrB,
alaSIPSnoopin-
gActive-
CallL4portB,
alaSIPSnoopin-
gActiveCall-
SipMediaTyp
e,
alaSIPSnoop-
ingCallViola-
tionType
sip snoop-
ing
This trap is sent when one or
more RTCP parameters exceeds
the threshold limit.
alaSIPSnoopingActiveCallIpAddrA—The Active Call IP address for direction A to B.
alaSIPSnoopingActiveCallIpAddrB—The Active Call IP address for direction B to A.
alaSIPSnoopingActiveCallL4portB—The Active call L4port for call direction B to A.
alaSIPSnoopingCallViolationType—The type of the Active Call violation:
jitterViolation (1), --jitter violation:
•
RTD
• MOS
• Rfactor
• Packet Loss
158 alaSIPSnoopingRTCPPktsLost physicalIndex sip snoop-
ing
This trap is sent when RTCP
packets are lost due to rate limit-
ing.
physicalIndex—The physical index of the involved object.
159 alaSIPSnoopingSignallingLost physicalIndex sip snoop-
ing
This trap is sent when SIP signal-
ing messages are lost due to rate
limiting.
No. Trap Name Objects Family Description