User guide

SNMP Traps Table
OmniSwitch AOS Release 7 Switch Management Guide March 2015 page B-37
150 alaSaaRTTThresholdRedTrap alaSaaCtrlOwn-
erIndex,
alaSaaCtrlT-
estIndex,
alaSaaCtrl-
LastRunRe-
sult,
alaSaaCtrl-
LastRun-
Time,
alaSaaCtrl-
RTTThresh-
old,
alaSaaMacRe-
sultsAvgRTT
saa This trap is sent when the RTT
threshold is crossed.
alaSaaCtrlOwnerIndex—The Owner name to identify the responsibility of the entries in the table (Default =
User).
alaSaaCtrlTestIndex—Unique name to identify the entries in the table. The name is unique across various
SNMP users (up to 32 characters).
alaSaaCtrlLastRunResult—The result of the latest SAA test iteration (Undertermined (0), Success (1), Failed
(2), Aborted (3)).
alaSaaCtrlLastRunTime—The time the last iteration of the SAA was run.
alaSaaCtrlRTTThreshold—The configured RTT Threshold, micro-seconds (Range = 0 - 1,000,000, Default =
0)
alaSaaMacResultsAvgRTT—The average Round Trip Time.
151 chassisTrapsDuplicateMacClear physicalIndex,
baseMacAd-
dress
chassis This trap is sent when the old
Master Chassis has rejoined the
Virtual Chassis as a slave. There
is no longer a possibility of
duplicate MAC address in the
network.
physicalIndex—The physical index of the involved object.
baseMacAddress—The base MAC Address.
152 alaFipsConfigFilterResourceLimit NA fips The allowed maximum percent-
age of filter resources configured
from the allocated FIPS
resources is exceeded. (Range =
0 - 100, Default = 80)
NA
153 virtualChassisUpgradeComplete virtualChassi-
sUpgrade-
CompleteStat
us
virtual
chassis
Critical trap indicates whether
the software upgrade process has
failed after a timeout or com-
pleted successfully. Note that if
the process fails, it may be still
possible for the system to recover
if the process successfully com-
pletes later after the expired tim-
eout.
virtualChassisUpgradeCompleteStatus—The Virtual Chassis upgrade completion status (Success (1), Failure
(2)).
No. Trap Name Objects Family Description