User guide

SNMP Traps Table
OmniSwitch AOS Release 7 Switch Management Guide March 2015 page B-27
112 unpMcLagConfigInconsistency alaDaUnpCom-
mandType
alaDaUnpName
alaDaUnp-
MacAddr1
alaDaUnp-
MacAddr2
alaDaUn-
pIpAddr
alaDaUnpIp-
Mask
alaDaUnpVlan-
Tag
alaDaUnpMC-
LAGId
da-unp This trap is sent when a configu-
ration becomes “Out of Sync".
alaDaUnpCommandType—Indicates which configuration command is out-of-sync: unpConfigCmd (1), mac-
RuleConfigCmd (2), macRangeRuleConfigCmd (3), ipRuleConfigCmd (4), vlanTagRuleConfigCmd (5), auth-
ServerUnpConfigCmd (6), authServerTimerConfigCmd (7), dynamicVlanConfigCmd (8), lagConfigCmd (9),
dynamicProfileConfigCmd (10).
alaDaUnpName—Indicates which UNP Profile is out-of-sync. If there is no UNP Profile associated, a zero
length string is sent.
alaDaUnpMacAddr1—The MAC for MAC rule or the lower limit of MAC Range Rule.
alaDaUnpMacAddr2—The upper limit of MAC Range Rule.
alaDaUnpIpAddr—The IP address in the IP Rule.
alaDaUnpIpMask—The IP Mask of the IP address in the IP Rule.
alaDaUnpVlanTag—The VLAN VLAN Tag Rule. A zero value means it is not applicable.
alaDaUnpMCLAGId—The Link Agg ID for MCLAG..
113 multiChassisGroupConsisFailure multiChassis-
TrapFailure
mcm This trap is sent when there is an
inconsistency between local and
peer chassis group.
multiChassisTrapFailure—Indicate multi-chassis failure.
114 multiChassisTypeConsisFailure mcm
xxx—Description.
115 alaPimNonBidirHello pimNeighbor-
AdressType,
pimNeighboAd-
dress
pim This trap is sent when a bidir-
capable router has received a
PIM hello from a non-bidir-capa-
ble router. It is generated when-
ever the counter alaPimsmNon-
BidirHelloMsgsRcvd is incre-
mented, subject to the rate limit
specified by alaPimsmNon-
BidirHelloNotificationPeriod.
pimNeighborAdressType—The address type of the PIM neighbor.
pimNeighborAddress—The primary IP address of the PIM neighbor. The InetAddressType is given by the
pimNeighborAddressType object.
116 dot1agCfmFaultAlarm dot1agCfmMe-
pHighest-
PrDefect
802.1AG This trap is sent when a MEP has
a persistent defect condition. A
notification (fault alarm) is sent
to the management entity with
the OID of the MEP that has
detected the fault.
No. Trap Name Objects Family Description