User guide

Login Specifications Logging Into the Switch
page 2-2 OmniSwitch AOS Release 7 Switch Management Guide March 2015
Login Specifications
Login Defaults
Access to managing the switch is always available for the admin user through the console port, even if
management access to the console port is disabled.
Using WebView to manage the switch Chapter 9, “Using WebView”
Using SNMP to manage the switch Chapter 10, “Using SNMP”
Platforms Supported OmniSwitch 10K, 6900
Login Methods Telnet, SSH, HTTP, SNMP
Number of concurrent Telnet sessions 6
Number of concurrent SSH sessions 8
Number of concurrent HTTP (WebView) sessions 4
Secure Shell public key authentication Password
DSA/RSA Public Key
RFCs Supported for SSHv2 RFC 4253 - SSH Transport Layer Protocol
RFC 4418 - UMAC: Message Authentication
Code using Universal Hashing
Parameter Description Command Default
Session login attempts allowed
before the TCP connection is
closed.
session login-attempt 3 attempts
Time-out period allowed for
session login before the TCP
connection is closed.
session login-timeout 55 seconds
Inactivity time-out period. The
length of time the switch can
remain idle during a login
session before the switch will
close the session.
session timeout 4 minutes
For more information about... See...