User guide

SNMP Traps Table
OmniSwitch AOS Release 7 Switch Management Guide March 2015 page B-11
36 lnkaggPortJoin traplnkaggId
traplnkaggPor-
tIfIndex
linkaggre-
gation
This trap is sent when any given
port of the link aggregate group
goes to the attached state.
traplnkaggId—Index value of the Link Aggregate group.
traplnkaggIfIndex—Port of the Link Aggregate group.
37 lnkaggPortLeave traplnkaggId
traplnkaggPor-
tIfIndex
linkaggre-
gation
This trap is sent when any given
port detaches from the link
aggregate group.
traplnkaggId—Index value of the Link Aggregate group.
traplnkaggIfIndex—Port of the Link Aggregate group.
38 lnkaggPortRemove traplnkaggId
traplnkaggPor-
tIfIndex
linkaggre-
gation
This trap is sent when any given
port of the link aggregate group
is removed due to an invalid con-
figuration.
traplnkaggId—Index value of the Link Aggregate group.
traplnkaggIfIndex—Port of the Link Aggregate group.
39 monitorFileWritten mirmonPrima-
rySlot
mirmonPrima-
ryPort
monitorFile-
Name
monitorFileSize
pmm A File Written Trap is sent when
the amount of data requested by
the user has been written by the
port monitoring instance.
mirmonPrimarySlot—Slot of mirrored or monitored interface.
mirmonPrimaryPort—Port of mirrored or monitored interface.
monitorFileName—The name of the file in which the traffic will be stored (the default is
“PMONITOR.ENC”).
monitorFileSize—The number of bytes in 16K (16384) increments allowed for the file (default 16384 bytes).
The file contains only the last monitorFileName bytes of the current port monitoring instance.
40 alaVrrp3TrapProtoError alaVrrp3Trap-
ProtoErrRea-
son
vrrp The error trap indicates that the
sending agent has encountered
the protocol error.
alaVrrp3TrapProtoErrReason—This indicates the reason for protocol error trap.
41 alaVrrp3TrapNewMaster alaVrrp3Oper-
MasterlpAd-
drType
alaVrrp3Oper-
MasterlpAddr
alaVrrp3Trap-
NewMaster-
Reason
vrrp The newMaster trap indicates
that the sending agent has transi-
tioned to Master state.
alaVrrp3OperMasterlpAddrType—This specifies the type of alaVrrp3OperMasterlpAddr in this row.
alaVrrp3OperMasterlpAddr—The master switch’s real (primary for vrrp over IPv4) IP address. This is the Ip
address listed as the source in the advertisement last received by this virtual switch. For IPv6, a link local
address.
alaVrrp3TrapNewMasterReason—This indicates the reason for NewMaster trap.
No. Trap Name Objects Family Description