User guide

SNMP Traps Table
OmniSwitch AOS Release 7 Switch Management Guide March 2015 page B-5
13 healthMonModuleTrap healthMod-
uleSlot
healthMonRx-
Status
healthMonRx-
TxStatus
healthMon-
MemorySta-
tus
healthMon-
CpuStatus
health Indicates a module-level thresh-
old was crossed.
healthModuleSlot—The (one-based) front slot number within the chassis.
healthMonRxStatus—Rx threshold status indicating if threshold was crossed or no change.
healthMonRxTxStatus—RxTx threshold status indicating if threshold was crossed or no change.
healthMonMemoryStatus—Memory threshold status indicating if threshold was crossed or no change.
healthMonCpuStatus—CPU threshold status indicating if threshold was crossed or no change.
14 healthMonPortTrap healthPortSlot
healthPortIF
healthMonRx-
Status
healthMonRx-
TxStatus
health Indicates a port-level threshold
was crossed.
healthPortSlot—The physical slot number for this port.
healthPortIF—The on-board interface number.
healthMonRxStatus—Rx threshold status indicating if threshold was crossed or no change.
healthMonRxTxStatus—RxTx threshold status indicating if threshold was crossed or no change.
15 healthMonCmmTrap healthMon-
MemorySta-
tus,
healthMon-
CpuStatus
health This trap is sent when an NI
memory or CPU threshold is
crossed.
healthMonMemoryStatus—Memory threshold status indicating if threshold was crossed or no change.
healthMonCpuStatus—CPU threshold status indicating if threshold was crossed or no change.
16 bgpEstablished bgpPeerLastEr-
ror
bgpPeerState
bgp The BGP routing protocol has
entered the established state.
bgpPeerLastError—The last error code and subcode seen by this peer on this connection. If no error has
occurred, this field is zero. Otherwise, the first byte of this two byte OCTET STRING contains the error code,
and the second byte contains the subcode.
bgpPeerState—The BGP peer connection state.
17 bgpBackwardTransition bgpPeerLastEr-
ror
bgpPeerState
bgp This trap is generated when the
BGP router port has moved from
a more active to a less active
state.
bgpPeerLastError—The last error code and subcode seen by this peer on this connection. If no error has
occurred, this field is zero. Otherwise, the first byte of this two byte OCTET STRING contains the error code,
and the second byte contains the subcode.
bgpPeerState—The BGP peer connection state.
No. Trap Name Objects Family Description