User guide

NTP Specifications Configuring Network Time Protocol (NTP)
page 15-2 OmniSwitch AOS Release 7 Switch Management Guide March 2015
NTP Specifications
NTP Defaults Table
The following table shows the default settings of the configurable NTP parameters:
NTP Defaults
Platforms Supported OmniSwitch 10K, 6900
RFCs supported 1305–Network Time Protocol
NTP Key File Location /flash/network
Maximum number of NTP servers per client 12
Parameter Description Command Default Value/Comments
Specifies an NTP server from which
this switch will receive updates
ntp server version: 4
minpoll: 6
prefer: no
key: 0
Used to activate client ntp client disabled
Used to activate NTP client
broadcast mode
ntp src-ip preferred disabled
Used to set the advertised broadcast
delay, in microseconds
ntp broadcast-delay 4000 microseconds