User guide

Managing Automatic Remote Configuration Download Automatic Remote Configuration Download Process
OmniSwitch AOS Release 7 Switch Management Guide March 2015 page 13-11
Process Illustration
For a detailed flow chart on the RCL process see “RCL Process Illustration Flow - Chart A” on
page 13-23.
Additional Process Notes
1 Once the switch obtains an IP interface from the DHCP server, remote access through SSH is
automatically configured to allow remote access in case of any download errors during the Auto
Configuration process.
2 After the successful download of the script file, the DHCP IP interface is automatically deleted.
However, SSH access remains enabled. Use the no aaa authentication ssh command to disable SSH
connectivity if desired.
3 The Automatic Remote Configuration process can be stopped using the auto-config-abort command.
Note. It is not recommended to have the write memory command in the script file if a configuration file is
downloaded. This causes the vcboot.cfg file to be overwritten with the commands in the script file.