User guide

Virtual Chassis Default Values Configuring Virtual Chassis
page 12-4 OmniSwitch AOS Release 7 Switch Management Guide March 2015
Virtual Chassis Default Values
The table below lists default values for Virtual Chassis.
Parameter Description Command Default Value/Comments
Chassis Identifier virtual-chassis configured-
chassis-id
0
Chassis group identifier virtual-chassis chassis-group Derived from last byte of Master
chassis MAC address
Chassis priority virtual-chassis configured-
chassis-priority
OS6900-Q32 - 120
All Others - 100
Hello-interval virtual-chassis hello-interval 10 seconds
Control VLAN virtual-chassis configured-
control-vlan
4094
Default VLAN virtual-fabric link N/A 1
VFL Mode virtual-chassis vf-link-mode Auto
Default auto-VFL ports virtual-chassis auto-vf-link-
port
OS10K - The first port of each
10G or 40G module
OS6900-X and T models - The
last 5 ports of each chassis,
including expansion slots. Ports
without a transceiver present are
included when determining VFL
port eligibility.
OS6900-Q32 - The last 5 ports
(28-32). A port that has a 40G-
to-10G splitter cable will be
counted as four ports.