User guide

Using SNMP SNMP Defaults
OmniSwitch AOS Release 7 Switch Management Guide March 2015 page 10-3
SNMP Defaults
The following table describes the default values of the SNMP protocol parameters.
Parameter Description Command Default Value/Comments
SNMP Management Station snmp station UDP port 162, SNMPv3, Enabled
Community Strings snmp community-map Enabled
SNMP Security setting snmp security Privacy all (highest) security
Trap filtering snmp-trap filter-ip Disabled
Trap Absorption snmp-trap absorption Enabled
Enables the forwarding of traps to
WebView.
snmp-trap to-webview Enabled
Enables or disables SNMP
authentication failure trap forwarding.
snmp authentication-trap Disabled